Search
Now showing items 1-10 of 10
Oxygen Enrichment in Combustion Processes: Comparative Experimental Results From Several Application Fields
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: The effects of using oxygen to partially or wholly replace fuel air in small-size melting furnaces were studied over a range of application fields. Following definition of the useful parameters, ...
Thermodynamics of Energy Storage by Melting Due to Conduction or Natural Convection
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper describes the most basic thermodynamic aspects of the process of energy storage by melting of a phase change material when the energy source is a stream of hot single-phase fluid. ...
Thermodynamics of Phase-Change Energy Storage: The Effects of Liquid Superheating During Melting, and Irreversibility During Solidification
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper considers the question of whether the optimum phase-change temperature for maximum exergy storage is universally equal to the geometric mean of the heat source and environment ...
Breakdown of the Exergy Balance in a Glass Furnace
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: An exergy balance for an industrial glass furnace was constructed on the basis of measured thermodynamic variables. The experimental data were collected for different operating modes, especially ...
Experimental Testing and Thermoeconomic Analysis of an Incineration Plant Postcombustor With Oxycombustion
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Experimental testing was performed on a prototype postcombustor fueled by pure oxygen and designed to treat exhaust gases from industrial waste incineration. The tests validated the technical ...
An Infrared Pyrometry System for Monitoring Gas Turbine Blades: Development of a Computer Model and Experimental Results
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This work describes the development of a computer modeling system for infrared pyrometry measurement of gas turbine blade temperature. The model accurately evaluates apparent target emissivity and ...
A Scanning Radiation Thermometry Technique for Determining Temperature Distribution in Gas Turbines
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: A scanning radiation thermometry technique for determining temperature distributions in gas turbines is presented. The system, an enhancement of an earlier work, can be used by operators even ...
Performance and Economic Enhancement of Cogeneration Gas Turbines Through Compressor Inlet Air Cooling
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Gas turbine air cooling systems serve to raise performance to peak power levels during the hot months when high atmospheric temperatures cause reductions in net power output. This work describes ...
Benefits of Compressor Inlet Air Cooling for Gas Turbine Cogeneration Plants
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: Compressor inlet air cooling is an effective method for enhancing the performance of gas turbine plants. This paper presents a comparative analysis of different solutions for cooling the compressor ...
Temperature Measurements in a Heavy Duty Gas Turbine Using Radiation Thermometry Technique: Error Evaluation
Publisher: The American Society of Mechanical Engineers (ASME)
Abstract: This paper describes a technique for the analysis of temperature measurement data obtained by using a radiation thermometer in a heavy duty gas turbine (PGT2 from Nuovo Pignone GE). The main ...